Jae-Won “Jay” Choi, Ph.D.
Director of Advanced Additive Manufacturing Lab (AAML)
Professor of Mechanical Engineering
UA Site Director of Center for Tire Research (CenTiRe)
Associate Editor of Additive Manufacturing
Research interests: Additive manufacturing processes, materials and applications; 3D printing of smart structures and biomedical devices.
Full CV can be found here.
Sarath Kamath, Ph.D. candidate
B.T. Polymer Engineering, Mahatma Gandhi University, India
Research area: 3D printing of rubber; Smart tires
Md Jarir Hossain, Ph.D. candidate
B.S. Mechanical Engineering, Khulna University of Engineering & Technology, Bangladesh
Research area: 3D printed sensors; Smart tires
Bipendra Basnet, Ph.D. student
B.S. in Mechanical Engineering, Kathmandu University, Nepal
Research area: Ceramic additive manufacturing; Binder jetting
Bharath reddy Alandur ramesh, Ph.D. candidate
B.E. in Mechanical Engineering, Anna University, India
M.S. in Industrial and Systems Engineering, Binghamton University, NY
Research area: 3D printed electrolyte
Shahba Tasmiya Mouna, Ph.D. student
B.S. in Biomedical Engineering, Military Institute of Science and Technology, Bangladesh, 2020
M.S. in Biomedical Engineering, The University of Akron, 2023
Research area: 3D-printed smart insoles for diabetic patients; 3D-printed sensors
Mehdi “Fredy” Sahami, Ph.D. student
B.S. in Polymer Engineering, Azad University, Iran, 2009
M.S. in Polymer Engineering, Azad University, Iran, 2012
Research areas: Binder development, Flexoelectricity, 3D printing of rubber
Daewoong Park, Ph.D. student
B.S. in Chemical Engineering, Chonnam National University, Republic of Korea, 2020
M.S. in Chemical Engineering, Chonnam National University, Republic of Korea, 2022
Research areas: Binder development, Flexoelectricity, 3D printing of rubber
Junho “Aiden” Jung, M.S.
Visiting Scholar from Jeonbuk National University, Korea
Research areas: Display technology
Vikram G.C., Ph.D. student
B.S. in Mechanical Engineering, Kathmandu University, Nepal, 2023
Research areas: New Additive Manufacturing Processes
Seo-hyeon “Stella” Oh, Ph.D. student
B.S. in Mechanical Engineering, Seoul National University of Science and Technology, 2022
M.S. in Mechanical Engineering, Seoul National University of Science and Technology, 2024
Research areas: Design for Additive Manufacturing