Category: Uncategorized

• Kim, M., Choi, J.W.*, “Rubber ink formulations with high solid content for direct-ink write process,” Additive Manufacturing, Additive Manufacturing, Vol. 44, 102023, 2021.
• Dilibal, S. Sahin, H., Danquah, O., Emon, M.O.F., Choi, J.W.*, “Additively Manufactured Custom Soft Gripper with Embedded Soft Force Sensors for an Industrial Robot,” International Journal of Precision Engineering and Manufacturing, Vol. 22, pp. 709-718, 2021.
• Kim, M., Philip, D.G., Emon, M.O.F., Choi, J.W.*, “Effects of Hardness on the Sensitivity and Load Capacity of 3D Printed Sensors,” International Journal of Precision and Manufacturing, Vol. 22, pp. 483-494, 2021.

Myoeum successfully defended her second M.S. thesis in March 25, 2021. Congratulations! She plans to pursue a Ph.D. degree at University of Virginia as soon as she graduates.

Five new members start their Ph.D. research from the spring semester 2021. Wish their success.

Bahareh Tabatabaei; Sarath Kamath; Md. Jarir Hossain; Bipendra Basnet; Bharath Reddy Alandur Ramesh

Mazen Kiki has become our lab member since Aug 2020. Congratulations!

• Alamdari, A., Lee, J., Emon, M.O.F., Kim, M., Dhinojwala, A., Choi, J.W., “Effect of Surface Energy Reducing Agents on Adhesion Force in Liquid Bridge Microstereolithography,” Additive Manufacturing, Accepted.
• Lin, M., Dilibal, S., Vatani, M., Choi, J.W., Engeberg, E., “Compliant Underwater Manipulator with Integrated Tactile Sensor for Nonlinear Force Feedback Control of an SMA Actuation System,” Sensors and Actuators: A. Physical.

He had a defense in July 31 2020 and is supposed to graduate in Aug 2020. Congratulations!

Congratulations!!! Mr. Emon successfully defended his Ph.D thesis in April 2. All the committee members loved his research and congratulated on his degree. He is the 4th doctor following Drs. Morteza Vatani, Yanfeng Lu, Faez Alkadi in AAML. He is currently finalizing publication work before he graduates in summer.

Due to the COVID-19 crisis, the defense was accomplished by a Webex conference.

A new paper titled “Conformal additive manufacturing using a direct-print process” authored by Alkadi et al. has been published in Additive Manufacturing (Vol 32, 100975). Congratulations!

https://www.sciencedirect.com/science/article/pii/S2214860419308048

His work started from Oct 2019. Additive Manufacturing is a top-ranked journal in the area of 3D printing and additive manufacturing.