Myoeum successfully defended her second M.S. thesis in March 25, 2021. Congratulations! She plans to pursue a Ph.D. degree at University of Virginia as soon as she graduates.
Categories
Categories
New members
Five new members start their Ph.D. research from the spring semester 2021. Wish their success.
Bahareh Tabatabaei; Sarath Kamath; Md. Jarir Hossain; Bipendra Basnet; Bharath Reddy Alandur Ramesh
Categories
New member – Mr. Kiki
Mazen Kiki has become our lab member since Aug 2020. Congratulations!
Categories
New papers accepted
- Alamdari, A., Lee, J., Emon, M.O.F., Kim, M., Dhinojwala, A., Choi, J.W., “Effect of Surface Energy Reducing Agents on Adhesion Force in Liquid Bridge Microstereolithography,” Additive Manufacturing, Accepted.
- Lin, M., Dilibal, S., Vatani, M., Choi, J.W., Engeberg, E., “Compliant Underwater Manipulator with Integrated Tactile Sensor for Nonlinear Force Feedback Control of an SMA Actuation System,” Sensors and Actuators: A. Physical.
He had a defense in July 31 2020 and is supposed to graduate in Aug 2020. Congratulations!
Categories
Omar became Dr. Emon
Congratulations!!! Mr. Emon successfully defended his Ph.D thesis in April 2. All the committee members loved his research and congratulated on his degree. He is the 4th doctor following Drs. Morteza Vatani, Yanfeng Lu, Faez Alkadi in AAML. He is currently finalizing publication work before he graduates in summer.
Due to the COVID-19 crisis, the defense was accomplished by a Webex conference.
Categories
New paper – 3D conformal printing
A new paper titled “Conformal additive manufacturing using a direct-print process” authored by Alkadi et al. has been published in Additive Manufacturing (Vol 32, 100975). Congratulations!
https://www.sciencedirect.com/science/article/pii/S2214860419308048
His work started from Oct 2019. Additive Manufacturing is a top-ranked journal in the area of 3D printing and additive manufacturing.
Categories
Byungchul joined the lab
Welcome!
Mr. Byungchul Yang joined the lab. His M.S. research starts in Jan 13 2020. He had worked for more than seven years at an electroplating company in S. Korea. His involvement is a great addition to a new area – hybrid additive manufacturing for 3D printed electronics.